EDE Logo Image]

EDE Home Up Contents Search
ELECTRO-DYN ELECTRONICS CORP.
Usage Instructions Irregular Cuttings

FOR TRACE CUTTING IRREGULAR SHAPED STOMAS

1. Trace the irregular shaped stoma on the flange side of the skin barrier, using a marker, centering it around the starter hole.

step_1-2.gif (8519 bytes)2. Select the letter size that will cut a round hole about 1/4" smaller than the traced hole, which will allow clearance to maneuver the skin barrier around the center post.
3. Remove cutter and skin barrier, (peel off center circle just cut) and poke finger through the center hole, tearing the silicone release paper backing for maneuvering clearance.

step_3.gif (12367 bytes)


4. Drop skin barrier over center post, and align the blade guide line over the traced line (allowing adequate clearance for maneuvering skin barrier). Push cutter downward into center post, while holding in this position, feed skin barrier toward the blade center line, following the traced line, in a manner similar to operating a sewing machine.
step_4-5.gif (12554 bytes)

5. Follow the traced line to complete the cut. Remove skin barrier, peel off cut material, and backing paper, now proceed with barrier application.

[ EDE Home ] [ Up ]

Send mail to webmaster@electro-dyn.com with questions or comments about this web site.
Copyright © 1998-2000 Electro-Dyn Electronics
Last modified: February 21, 1998